Carbon nanofibers (CNFs) are kwidely used to fabricate nanocomposites with enhanced properties. The emergent properties of the nanocomposites depend on the initial properties of the CNFs and how the fibers have been dispersed within the polymer matrix. This study looks at the fabrication of nanocomposites using dodecyl, butyl, and acetyl functionalized CNFs with cellulose acetate as the polymer matrix. The CNFs were prepared by electro-spinning, and functionalization was achieved using alkyl halides in the presence of lithium. Scanning Electron Microscopy (SEM) showed that the fibers were well embedded in the polymer Matrix, Thermal Gravimetric Analysis (TGA) of the nanocomposite revealed a slight increase in the degradation temperatures of the nanocomposites as compared to the blank sample, the aggregate loss of weight of the samples was about 80%. Dynamic Mechanical Analysis (DMA) of the nanocomposites showed increased stiffness and modulus storage by an average of 450MPa for butyl and dodecyl-functionalized CNFs, however, the storage modulus values of the nanocomposites generally decreased with an increase in temperature. The glass transition temperature of the nanocomposites was higher than that of the reference sample by an average of +36°C. Conductivity measurements of the nanocomposites showed no changes at lower frequencies of 1x102 - 4x104Hz. However, the values started increasing at peaked at 5x107Hz. The conductivity measurements revealed that the nanocomposites exhibited higher conductivity peaks at specific frequencies compared to the reference sample, indicating an enhanced electrical property of the nanocomposite. The study successfully fabricated nanocomposites with enhanced mechanical, thermal, and dielectric properties using functionalized CNFs.
| Published in | Advances in Materials (Volume 13, Issue 3) |
| DOI | 10.11648/j.am.20241303.13 |
| Page(s) | 55-63 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Carbon Nanofibers, Alkylation, Cellulose Acetate, Carbon Nanocomposites
| [1] | Satish K., Hant D., Mohan S., Jung O., David S. (2002). Fibers from Polypropylene/nano carbon fiber nanocomposite. Polymer Communication. 43, 1701-1703. |
| [2] | Nitilaksha H., Sunay B., Ramiz B., Maria C., Amit K., Jimmy M., Gajanan B. (2023). Carbon nanofibers-based carbon–carbon nanocomposite fibers. Discover Nano, 18: 159. |
| [3] | Alejandro J., Rodriguez M., Guzman C., Bob M. (2010). Mechanical properties of carbon nanofiber/fiber-reinforced hierarchical polymer nanocomposites manufactured with multiscale-reinforcement fabrics. CARBON, 49: 937 –948. |
| [4] |
Joshi M., Bhattacharyya A. (2004). Carbon Nanofiber Reinforced Carbon/Polymer Nanocomposite. NSTI-Nanotech 3: 134-138.
www.nsti.org ISBN 0-9728422-9-2 |
| [5] | Dafeng Yan, Shuo Dou, Li Tao, Zhijuan Liu, Zhigang Liu, Jia Huo and Shuangyin Wang 2016: Electropolymerized supermolecule derived N, P co-doped carbon nanofiber networks as a highly efficient metal-free electrocatalyst for the hydrogen evolution reaction; J. Mater. Chem. A,4, 13726-13730. |
| [6] | Minghuan Liu, Xiao-Peng Duan, Ye-Ming Li, Da-Peng Yang, Yun-Ze Long 2017, Electrospun nanofibers for wound healing, |
| [7] | Ana M. Martins, George Eng, Sofia G. Caridade, et al, 2014: Electrically Conductive Chitosan/Carbon Scaffolds for Cardiac Tissue Engineering Biomacromolecules, 15, 635−643 |
| [8] | Kumari, S., Mishra, R.K., Parveen, S. et al. 2024 Fabrication, structural, and enhanced mechanical behavior of MgO substituted PMMA nanocomposites for dental applications. Sci Rep 14, 2128. |
| [9] | Min-Ho Kang, Tae-Sik Jang, Hyun-Do Jung, Sae-Mi Kim, Hyoun-Ee Kim, Young-Hag Koh, Juha Song (2016) Poly (ether imide)-silica hybrid coatings for tunable corrosion behavior and improved biocompatibility of magnesium implants Biomed. Mater. 11 035003 |
| [10] | Nakamura, M.; Ueda, K.; Yamamoto, Y.; Aoki, K.; Zhang, M.; Saito, N.; Yudasaka, M. (2022) Bisphosphonate type-dependent cell viability suppressive effects of carbon nano horn-calcium phosphate-bisphosphonate nanocomposites. Biomater. Sci. 10, 6037–6048. |
| [11] | Yu Chen et al., "Investigation on Space Environmental Degradation Effects of Solar Cell Coverglass," in IEEE Transactions on Plasma Science, vol. 41, no. 12, pp. 3471-3476, Dec. 2013, |
| [12] | Ayesha K., Patrizia B. (2022). Poly (methyl methacrylate) Nanocomposite Foams Reinforced with Carbon and Inorganic Nanoparticles—State-of-the-Art. J. Compos. Sci. 6, 129. |
| [13] | Liang, F., Sadana, A. K., Peera, A., Chattopadhyay, J., Gu, Z., Hauge, R. H., & Billups, W. E. (2004). A Convenient Route to Functionalized Carbon Nanotubes. Nano Letters, 4(7), 1257–1260. |
| [14] | Wang H, Xu P, Zhong W, Shen L, Du Q. (2005) Transparent poly (methyl methacrylate)/silica/zirconia nanocomposites with excellent thermal stabilities. Polymer Degradation and Stability 2005; 87: 319-27. |
| [15] | Elsayed Elbayoumy, Nasser A. El-Ghamaz, Farid Sh. Mohamed, Mostafa A. Diab, Tamaki Nakano, (2021) Dielectric Permittivity, AC Electrical Conductivity and Conduction Mechanism of High Crosslinked-Vinyl Polymers and Their Pd (OAc)2 Nanocomposites Polymers, 13, 3005 |
| [16] | Sampat Chauhan, Bhanu Pratap Singh, Rajender Singh Malik et al et al (2018) Detailed Dynamic Mechanical Analysis of Thermomechanically Stable Melt-Processed PEK–MWCNT Nanocomposites, Polymer Nanocomposites—2018. |
| [17] | Tshwafo Elias Motaung, Adriaan Stephanus Luyt, Federica Bondioli et al, 2012 PMMA-titania nanocomposites: Properties and thermal degradation behaviour, Polymer Degradation and Stability 97, 1325-1333 |
| [18] | Neira-Velázquez M., Guadalupe R., Valle L., Hernández-Hernández E., Zapata-González I. (2008). Surface modification of carbon nanofibers (CNFs) by plasma polymerization of methylmethacrylate and its effect on the properties of PMMA/CNF nanocomposites. Polymers. 162, 1-11. |
| [19] | Xianglong Li; Jiahua Shi; Yujun Qin; Qi Wang; Hongxia Luo; Pu Zhang; Zhi-Xin Guo; Hyung-Suk Woo; Dong-Kyu Park. (2007). Alkylation and arylation of single-walled carbon nanotubes by mechanochemical method. Chemical Physics Letters. 444(4-6), 258-262. |
| [20] | Lichao Feng., NingXie., Jing Z. (2020). Carbon Nanofibers and Their Nanocomposites: A Review of Synthesizing, Properties and Applications. Materials, 7, 3919-3945. |
| [21] | Ling Zhang Ling Zhang. (2020). Applications, Challenges, and Development of Nanomaterials and Nanotechnology. Journal of the Chemical Society of Pakistan, 42(5). |
| [22] | Diab, M. A.; El-Ghamaz, N. A.; Mohamed, F. S.; El-Bayoumy, E. M. (2017) Conducting polymers VIII: Optical and electrical conductivity of poly (bis-m-phenylenediaminosulphoxide). Polym. Test., 63, 440–447. |
APA Style
Mukhebi, S. S., Otieno, G., Aluoch, A. O., Andala, D. M., Owour, J. (2024). Fabrication and Characterization of Alkyl-Functionalized CNFs/Cellulose Acetate Polymer Nanocomposites. Advances in Materials, 13(3), 55-63. https://doi.org/10.11648/j.am.20241303.13
ACS Style
Mukhebi, S. S.; Otieno, G.; Aluoch, A. O.; Andala, D. M.; Owour, J. Fabrication and Characterization of Alkyl-Functionalized CNFs/Cellulose Acetate Polymer Nanocomposites. Adv. Mater. 2024, 13(3), 55-63. doi: 10.11648/j.am.20241303.13
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.am.20241303.13,
author = {Situma Stephen Mukhebi and Geoffrey Otieno and Austin Ochieng Aluoch and Dickson Mubera Andala and James Owour},
title = {Fabrication and Characterization of Alkyl-Functionalized CNFs/Cellulose Acetate Polymer Nanocomposites
},
journal = {Advances in Materials},
volume = {13},
number = {3},
pages = {55-63},
doi = {10.11648/j.am.20241303.13},
url = {https://doi.org/10.11648/j.am.20241303.13},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20241303.13},
abstract = {Carbon nanofibers (CNFs) are kwidely used to fabricate nanocomposites with enhanced properties. The emergent properties of the nanocomposites depend on the initial properties of the CNFs and how the fibers have been dispersed within the polymer matrix. This study looks at the fabrication of nanocomposites using dodecyl, butyl, and acetyl functionalized CNFs with cellulose acetate as the polymer matrix. The CNFs were prepared by electro-spinning, and functionalization was achieved using alkyl halides in the presence of lithium. Scanning Electron Microscopy (SEM) showed that the fibers were well embedded in the polymer Matrix, Thermal Gravimetric Analysis (TGA) of the nanocomposite revealed a slight increase in the degradation temperatures of the nanocomposites as compared to the blank sample, the aggregate loss of weight of the samples was about 80%. Dynamic Mechanical Analysis (DMA) of the nanocomposites showed increased stiffness and modulus storage by an average of 450MPa for butyl and dodecyl-functionalized CNFs, however, the storage modulus values of the nanocomposites generally decreased with an increase in temperature. The glass transition temperature of the nanocomposites was higher than that of the reference sample by an average of +36°C. Conductivity measurements of the nanocomposites showed no changes at lower frequencies of 1x102 - 4x104Hz. However, the values started increasing at peaked at 5x107Hz. The conductivity measurements revealed that the nanocomposites exhibited higher conductivity peaks at specific frequencies compared to the reference sample, indicating an enhanced electrical property of the nanocomposite. The study successfully fabricated nanocomposites with enhanced mechanical, thermal, and dielectric properties using functionalized CNFs.
},
year = {2024}
}
TY - JOUR T1 - Fabrication and Characterization of Alkyl-Functionalized CNFs/Cellulose Acetate Polymer Nanocomposites AU - Situma Stephen Mukhebi AU - Geoffrey Otieno AU - Austin Ochieng Aluoch AU - Dickson Mubera Andala AU - James Owour Y1 - 2024/09/29 PY - 2024 N1 - https://doi.org/10.11648/j.am.20241303.13 DO - 10.11648/j.am.20241303.13 T2 - Advances in Materials JF - Advances in Materials JO - Advances in Materials SP - 55 EP - 63 PB - Science Publishing Group SN - 2327-252X UR - https://doi.org/10.11648/j.am.20241303.13 AB - Carbon nanofibers (CNFs) are kwidely used to fabricate nanocomposites with enhanced properties. The emergent properties of the nanocomposites depend on the initial properties of the CNFs and how the fibers have been dispersed within the polymer matrix. This study looks at the fabrication of nanocomposites using dodecyl, butyl, and acetyl functionalized CNFs with cellulose acetate as the polymer matrix. The CNFs were prepared by electro-spinning, and functionalization was achieved using alkyl halides in the presence of lithium. Scanning Electron Microscopy (SEM) showed that the fibers were well embedded in the polymer Matrix, Thermal Gravimetric Analysis (TGA) of the nanocomposite revealed a slight increase in the degradation temperatures of the nanocomposites as compared to the blank sample, the aggregate loss of weight of the samples was about 80%. Dynamic Mechanical Analysis (DMA) of the nanocomposites showed increased stiffness and modulus storage by an average of 450MPa for butyl and dodecyl-functionalized CNFs, however, the storage modulus values of the nanocomposites generally decreased with an increase in temperature. The glass transition temperature of the nanocomposites was higher than that of the reference sample by an average of +36°C. Conductivity measurements of the nanocomposites showed no changes at lower frequencies of 1x102 - 4x104Hz. However, the values started increasing at peaked at 5x107Hz. The conductivity measurements revealed that the nanocomposites exhibited higher conductivity peaks at specific frequencies compared to the reference sample, indicating an enhanced electrical property of the nanocomposite. The study successfully fabricated nanocomposites with enhanced mechanical, thermal, and dielectric properties using functionalized CNFs. VL - 13 IS - 3 ER -
School of Chemistry and Material Science, Technical University of Kenya, Haile Selassie Avenue, Nairobi, Kenya
School of Chemistry and Material Science, Technical University of Kenya, Haile Selassie Avenue, Nairobi, Kenya
School of Chemistry and Material Science, Technical University of Kenya, Haile Selassie Avenue, Nairobi, Kenya
Chemistry Department, Multimedia University of Kenya, Nairobi, Kenya
School of Chemistry and Material Science, Technical University of Kenya, Haile Selassie Avenue, Nairobi, Kenya
